Road Safety Tips for Big Rig Drivers

As a big rig driver, you have a serious responsibility to watch out for everyone’s safety on the road. While proper training goes a long way toward decreasing your chances of having an accident, there are other factors at play that you must keep in mind. Always follow these road safety tips for truck drivers to ensure that you don’t get involved in a traffic accident.

Plan Your Route Carefully

Avoiding hazardous driving conditions can prevent many accidents. Before you climb up into the driver’s seat, take a few minutes to research the route. If your intended route is covered in snow or filled with heavy traffic, then reassess the situation to determine whether or not an alternate route is available that is safer. You should also plan plenty of time to arrive at your destination safely so that you are not tempted to speed.

Always Conduct a Pre-Trip Check

Your big rig must undergo regular professional inspections to drive legally on public roads. Yet, many things can go wrong between trips. Always begin your drive with a pre-trip check of all of the essential components of your big rig. It’s always better to discover that you have a brake leak or damaged tire before you are barreling down the freeway. This way, you can arrange for the repairs to be done at our auto service center so that you can get your truck safely back on the road as soon as possible.

Monitor Your Truck’s Space Cushion

When you drive a big rig regularly, it is easy to forget the size of your vehicle. Always watch to make sure that the top, bottom and sides of the vehicle do not get too close to other cars or objects. Be familiar with the height of your truck as you drive under bridges or through tunnels, and use caution as you change lanes to avoid hitting cars that are in your blind spots.

Know When to Reduce the Speed

Hitting deadlines on time is part of a trucker’s life. Yet, you must always be careful not to let a looming deadline cause you to speed. Remember that the posted speed limit may still be too high if you are driving through hazardous road conditions, around a curve or in a work zone. Be prepared to slow down, but do not go so slow as to impede traffic. You should also remember that taking a ramp too fast is a common cause of rollover accidents. Stay aware of where you are going, and always reduce your speed as you drive up or down a ramp.

Take Care of Yourself

Drivers sometimes forget that they are one of the most important safety features of their vehicle. Never drive your truck when you are tired, and double check those safety features before you head out. If you do notice a problem when you are driving, pull over to a safe place on the side of the road so that you can wait for our heavy duty towing service to arrive.

When you love driving, a career as a truck driver opens up many opportunities to travel. By making sure that you always stay safe on the road, you can look forward to many more years of driving your big rig.

5 Tips for Maintaining Your Brake System

The brakes on your car are one of the most important features for keeping you and any passengers safe. While most people keep up with their oil changes, it is common for the brake system to be neglected until it shows signs of a serious problem. Proper care of your car’s brakes will not only keep you safe, but regular maintenance can also reduce the wear and tear that leads to more frequent replacements. Use these tips to keep your brake system maintained so that you can feel confident that your car will stop every time you press the pedal.

Check the Brake Fluid Level

You should check your brake fluid regularly to make sure that it is not low or absorbing water. Begin by looking at the reservoir to make sure that the fluid falls between the two lines that indicate whether it is too high or too low. If the brake fluid is low, then it needs to be filled to the appropriate level. However, you should be wary if it is extremely low because this could indicate a leak somewhere along the system. Cloudy or dark brake fluid also indicates a need to take your car to the auto service center for an inspection.

Keep Up With Fluid Changes

The brake fluid should be changed regularly to ensure that contaminants do not get into the system and that it has the proper viscosity to do its job. Follow the recommended time schedule for fluid changes that is provided by your vehicle’s manufacturer. In most cases, this will be based upon the mileage or a specific period of time.

Schedule Regular Inspections

Your brakes should be checked every time you have your tires rotated. During this inspection, the fluid, rotors and pads will be checked to see if they need to be replaced. In most cases, you will need to have this done every six months, but the system may need to be inspected more frequently if you drive long distances regularly or you drive a vehicle with a heavy load such as a large truck.

Watch for the Brake Warning Light

With every new car, you should familiarize yourself with the warning lights that are displayed on the dashboard if something goes wrong. Never ignore a brake warning light because this could indicate that you might not be able to stop your vehicle. If the warning light comes on, then contact a tow service that can safely transport your vehicle to the repair shop.

Know When a Replacement is Needed

At some point, every brake system needs to be replaced. For instance, the pads may begin to emit a noise when they are worn down too much to help the car stop. When a replacement is needed, take your car to a certified auto repair company that always uses quality parts so that your new brake system is more likely to go the distance.

Well-maintained brake systems are critical for keeping everyone safe in your vehicle, and you should be able to trust that your car will stop when its time. Make sure that brake maintenance and inspections are a part of your car care routine so that you hopefully never see that dreaded warning light.